After doing the login and setup process of the Wavlink extender by the Wavlink web portal you can extend the range of the main router WiFi signal. To know the proper information about the web portal method read the below instructions. 

Required Few Things To Do Web Setup Process 

• Must have a WiFi device such as a laptop, computer, cell phone, PC, etc. 
• On the WiFi gadget, there is access to the latest web browser. 
• Just keep in mind the Wavlink login details. 
• Also, know the Wavlink WiFi range extender default web address. 

Log Into Extender Through Web Portal 

• First, take out the Wavlink extender device from the box. 
• After that, place the power plug of the Wavlink extender in the power socket. 
• Now, take the WiFi device and connect it to the Wavlink WiFi range extender network. 
• Later open the web browser and enter wifi.wavlink.com in the address bar. 
• Next, fill in all the login details which are shown on the display page. 
• In the end, tap on the login icon to finish the Wavlink WiFi range extender login process. 

Execute Wavlink Extender Setup Process 

• First, on a connected WiFi gadget, again open a browser. 
• Later, find the Wavlink extender default web address wifi.wavlink.com in the navigation search field. If the web portal does not work then you can also enter an IP address 192.168.10.1 instead of that. 
• Now, within a few seconds, the login portal will show up on your computer screen. 
• Next, insert the extender username and security password. 
• After that, select the setup wizard option and pick that WiFi network from the list of which one you want to boost. 
• In the end, fill details and hit on the connect icon to see the Extender successfully connected notification on your computer display. 

 

Note: If this method doesn’t help you to do the Wavlink extender setup process then try the other WPS method. 

 

WPS Setup Method 

• First, near the router, place the Wavlink WiFi range extender. 
• Now, in the socket settle the plug of the Wavlink extender. 
• Next, push the router and extender’s WPS button. 
• Later, the WPS LED starts to blink solid after pushing the WPS button. 
• Hence, the solid LED defines that the Wavlink extender and router are both gadgets successfully linked with each other. 

 

After doing the Wavlink extender setup if you are facing any issues then try the below troubleshooting or solutions to fix them. 

Fix Wavlink Extender Setup Issues 

Check the Placement Of The Wavlink Extender 

The central location of your house and office is best to get a WiFi signal in all directions. Make sure that the gap between the extender and the router is not more and does not locate near metal or electronic gadgets. Because metal or electronic gadgets absorb all the WiFi signals which come from the extender and router device. Refrigerators, microwaves, fish tanks, etc. These types of gadgets absorb the WiFi signal. 

 

Improve The Wavlink Extender Software: 

To improve software, go to the Wavlink web management page on a connected computer. 

Now, look for the network administration option and then tap on the software upgrade option. 

After that, install the latest version of the software file on your laptop or computer. 

Further, installing the software file restarting your extender. 

 

Discard Extra Connections 

If the above tips don’t help you to fix the extender issue then try this method. We recommend that you remove all WiFi-containing gadgets that are connected to an extender network but you are not using that device. By doing this, you can also fix the Wavlink extender issue. To check how many WiFi gadgets connect with your extender network then visit the Wavlink settings page. 

 

Power Cycle Wavlink Extender 

• Initially, push the power button to turn off the gadget. 
• Now, take out the plug of the Wavlink extender from a socket. 
• Next, wait a minute and push back the power button to turn on the device. 
• In the end, in the socket put back the Wavlink extender power plug. 

 

Reset Extender 

• For most of the Wavlink extenders, the reset button is located at the back or bottom. 
• First, press the reset button of your Wavlink extender after finding it. 
• Now, all the LEDs of the extender will be turned off. 
• As it means the reset process of the Wavlink extender is now completely done. 

 

Note: After resetting the Wavlink extender you will need to do the login and configuration process through the wifi.wavlink.com portal.

 

After the entire study of this page, you will be able to do the setup and login process through the Wavlink web portal. If you are facing any issue then you can easily resolve it by following the above solutions. Stay aware of more future updates.